Kingston HyperX 4GB (2x2GB) 2nd Revision Memory Kit 1600MHz DDR3 Non-ECC CL9 240-pin DIMM Model:   K-KHX1600C9AD3K2/4G Manufacturer:   Kingston Availability:   71 in Stock Shipping:   From Only £2.99 Price:   £21.20 (excluding VAT) £25.44 (including VAT) Buy Now:

Product Specifications:
Description	Kingston's KHX1600C9AD3K2/4G is a kit of two 256M x 64-bit (2GB) DDR3-1600MHz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.
Warranty	Lifetime Warranty
Features	JEDEC standard 1.5V ± 0.075V Power Supply VDDQ = 1.5V ± 0.075V 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7(DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C Asynchronous Reset PCB : Height 1.180' (30.00mm), double sided component
Memory Size	4096 MB ( 2 module(s) x 2048 MB )
Memory Type	DDR3
Memory Speed	1600 MHz
Memory Package	DIMM
Pin Configuration	240 pins
Slot	240-Pin (x2) DIMM
Error Correction	Non ECC
CAS Latency	CL9
Connector Material	Gold
Module Configuration	256Mx64
Voltage	1.65 V
Form Factor	240-Pin DIMM Module Kit
Dimensions	(W) x (D) x (H)